Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 443
Maintenance
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 443 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Chapter 26 - Maintenance This section provides Maintenance configuration tasks including Save, Backup, Restore, Activate, Delete, Restart, Factory Defaults, and Firmware upgrade and selection. 26-1 Configuration The switch stores its configuration in a number of files in text format. The files are either virtual (RAM-based) or stored in flash on the switch. There are three system files: • running-config: A virtual file representing the current active configuration on the switch. This file is volatile. • startup-config: The startup configuration for the switch, read at boot time. • default-config: A read-only file with vendor-specific configuration. This file is read when the system is restored to default settings. 26-1.1 Save startup-config This copies running-config to startup-config; the current active configuration will be used at the next reboot. To save running configuration in the web UI: 1. Click Maintenance, Configuration, and Save startup-config. 2. Select a file name to save (startup-config or enter a filename). 3. Click the Save Configuration button. Figure 26-1.1: Save Startup Configuration Button Save Configuration : Click to save configuration; the running configuration will be written to flash memory for system boot up to load this startup configuration file. When successfully completed, the message "save running config to startup-config successfully." displays. Click the OK button to clear the message. 33763 Rev. G https://www.transition.com Page 443 of 496