Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 254
Upload, Generate, Browser
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 254 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 15-1.5 HTTPS This page lets you configure the HTTPS settings and maintain the current certificate on the switch. Web Interface To configure an Access Management Configuration in the web UI: 1. Click Configuration, Security, Management and HTTPS. 2. Specify the Certificate Maintain, Certificate Pass Phrase, Certificate Upload. 3. Click Browse... to select the file to upload. 4. Click Apply. Figure 15-1.5: HTTPS Configuration Parameter descriptions: Certificate Maintain : The operation of certificate maintenance. Possible operations are: Upload: Upload a certificate PEM file. Possible methods are: Web Browser or URL. Generate: Generate a new self-signed RSA certificate. Certificate Pass Phrase : Enter the pass phrase in this field if your uploading certificate is protected by a specific passphrase. Certificate Upload : Upload a certificate PEM file into the switch. The file should contain the certificate and private key together. If you have two separated files for saving certificate and private key. Use the Linux cat command to combine them into a single PEM file. For example, cat my.cert my.key > my.pem. Note that the RSA certificate is recommended since most new browsers versions have removed support for DSA in certificates (e.g. Firefox v37 and Chrome v39). Possible methods are: Web Browser: Upload a certificate via Web browser. URL: Upload a certificate via URL; the supported protocols are HTTP, HTTPS, TFTP and FTP. The URL format is ://[[:]@]< host>[:][/]/. For example: tftp://10.10.10.10/new_image_path/new_image.dat, http://username:[email protected]:80/new_image_path/new_image.dat. 33763 Rev. G https://www.transition.com Page 254 of 496