Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 314
EType, IPv4/ICMP, IPv4/UDP, IPv4/TCP, IPv4/Other, Permit, Filter, Enabled, Disabled
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 314 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Frame Type : Indicates the frame type of the ACE. Possible values are: Any: The ACE will match any frame type. EType: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get matched by IP and ARP frames. ARP: The ACE will match ARP/RARP frames. IPv4: The ACE will match all IPv4 frames. IPv4: The ACE will match all IPv4 frames. IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol. IPv4/UDP: The ACE will match IPv4 frames with UDP protocol. IPv4/TCP: The ACE will match IPv4 frames with TCP protocol. IPv4/Other: The ACE will match IPv4 frames, which are not ICMP / UDP / TCP. IPv6: The ACE will match all IPv6 standard frames. Action : Indicates the forwarding action of the ACE. Permit: Frames matching the ACE may be forwarded and learned. Deny: Frames matching the ACE are dropped. Filter: Frames matching the ACE are filtered. Rate Limiter : Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When Disabled is displayed, the rate limiter operation is disabled. Port Redirect : Indicates the port redirect operation of the ACE. Frames matching the ACE are redirected to the port number. The allowed values are Disabled or a specific port number. When Disabled is displayed, the port redirect operation is disabled. Mirror : Specify the mirror operation of this port. The allowed values are: Enabled: Frames received on the port are mirrored. Disabled: Frames received on the port are not mirrored. The default value is "Disabled". CPU : Forward packet that matches the specific ACE to CPU. CPU Once : Forward first packet that matches the specific ACE to CPU. Counter : The counter indicates the number of times the ACE was hit by a frame. Conflict : Indicates the hardware status of the specific ACE. The specific ACE is not applied to the hardware due to hardware limitations. Buttons Auto-refresh : Click to refresh the page automatically every 3 seconds. Refresh : Click to manually refresh the page immediately. 33763 Rev. G https://www.transition.com Page 314 of 496