Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 361
Forced, Switch, Manual
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 361 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 19-3 RPL Configuration RPL Role : It can be either RPL owner or RPL Neighbor. RPL Port : This allows to select the east port or west port as the RPL block. Clear : If the owner has to be changed, then the clear check box allows to clear the RPL owner for that ERPS ring. 19-4 Sub-Ring Configuration Topology Change : Clicking this checkbox indicates that the topology changes in the sub-ring are propagated in the major ring. 19-5 Instance Command Command : Administrative command. A port can be administratively configured to be in either Manual Switch or Forced Switch state: Forced Switch : Forced Switch command forces a block on the ring port where the command is issued. Manual Switch : In the absence of a failure or FS, Manual Switch command forces a block on the ring port where the command is issued. Clear : Clear command used for clearing an active local admin command (e.g., Forced Switch or Manual Switch). Port : Port selection - Port0 or Port1 of the protection Group on which the command is applied. Instance State Protection State : ERPS state according to State Transition Tables in G.8032 (e.g., Manual). Port 0 : OK: State of East port is ok. SF: State of East port is Signal Fail. Port 1 : OK: State of West port is ok. SF: State of West port is Signal Fail Transmit APS : The transmitted APS from G.8032 State Transition Tables (e.g., MS DNF BPR1 or NR RB DNF BPR0). Port 0 Receive APS : The received APS on Port 0 according to State Transition Tables in G.8032. Port 1 Receive APS : The received APS on Port 1 according to State Transition Tables in G.8032. WTR Remaining : Remaining WTR timeout in milliseconds. RPL Un-blocked : APS is received on the working flow. No APS Received : RAPS PDU is not received from the other end. Port 0 Block Status : Block status for Port 0 (both traffic and R-APS block status). R-APS channel is never blocked on sub-rings without virtual channel. 33763 Rev. G https://www.transition.com Page 361 of 496