Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 367
Clear, Lock Out, Forced Switch, Manual Switch P, Manual Switch W, Exercise, Freeze, Lock Out Local
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 367 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Instance Command Command : At the dropdown select one of the following commands: None: There is no active local command on this instance (default). Clear: The active local command will be cleared. Lock Out: This EPS is locked to working (not active). In case of 1:N (more than one EPS with same protecting flow) - when one EPS switch to protecting flow, other EPS is enforced this command Forced Switch: Forced switch to protecting. Manual Switch P: Manual switch to protecting. Manual Switch W: Manual switch to working. This is only allowed in case of 'non-revertive' mode Exercise: Exercise of the protocol - not traffic effecting. This is only allowed in case of 'Bidirectional' protection type Freeze: This EPS is locally freezed - ignoring all input. Lock Out Local: This EPS is locally "locked out" - ignoring local SF detected on working. Instance State Protection State : EPS state according to State Transition Tables in G.8031. W Flow : Can be OK or SF: OK: State of working flow is ok SF: State of working flow is Signal Fail SD: State of working flow is Signal Degrade (for future use) P Flow : Can be OK or SF: OK: State of protecting flow is ok SF: State of protecting flow is Signal Fail SD: State of protecting flow is Signal Degrade (for future use) Transmit APS r/b : The transmitted APS according to State Transition Tables in G.8031. Receive APS r/b : The received APS according to State Transition Tables in G.8031. Architecture Mismatch : The architecture indicated in the received APS does not match the locally configured. APS on working : APS is received on the working flow. Switching Incomplete : Traffic is not selected from the same flow instance in the two ends. No APS Received : APS PDU is not received from the other end. Buttons Auto-refresh : Click to refresh the page automatically every 3 seconds. Refresh : Click to manually refresh the page immediately. Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. 33763 Rev. G https://www.transition.com Page 367 of 496