Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 179

Transition Networks SISPM1040-3xxx-L Web User Guide If you click an HqoS ID the HqoS ID column, the QoS Egress Port Scheduler and Shapers page displays for the Port. If you click the linked text Non-service in the HqoS ID column, the QoS Egress Port Shapers page displays for the Port. Parameter descriptions: HqoS ID : The HqoS ID identifies the HqoS entry. Click on the linked HqoS ID in order to configure the scheduler and shapers. Mode : Shows the scheduling mode for this HqoS entry. Weight/Qn : Shows the weight for this queue and HqoS entry. Shapers/Qn : Shows "disabled" or actual queue shaper rate (e.g., "800 Mbps"). Shapers/HqoS : Shows "disabled" or actual HqoS entry shaper rate - e.g. "800 Mbps". For Non-service, this is the port shaper rate. Guaranteed Bandwidth Configured : Shows "disabled" or actual configured HqoS entry guaranteed bandwidth (e.g., "800 Mbps"). Guaranteed Bandwidth Times Used : Number of services using an HqoS Profile. Guaranteed Bandwidth Calculated : Shows actual calculated HqoS entry guaranteed bandwidth (e.g., "800 Mbps"). If no traffic is mapped to an HqoS entry, the guaranteed bandwidth is 0 Kbps. Buttons Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. Cancel : Click to undo any changes made locally and return to the previous page. 33763 Rev. G https://www.transition.com Page 179 of 496