Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 337
Lantronix SISPM1040-3166-L Manual
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 337 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Chapter 18 - MEP 18-1 MEP Configuration The Maintenance Entity Point instances are configured here. A MEP (Maintenance Entity Endpoint) is an endpoint in a Maintenance Entity Group (ITU-T Y.1731). To configure the MEP parameters in the web interface: 1. Click MEP > MEP Configuration. 2. Click the "Add New MEP" button. Only one MEP can be added for each apply operation. 3. Specify the Maintenance Entity Point parameters. 4. Click Apply to save the changes. Figure 15-1: Maintenance Entity Point Parameter descriptions: Delete : This box is used to delete a MEP immediately. Instance : The ID of the MEP. Click on the ID of a MEP to enter the configuration page. The range is 1 - 3124. Domain : Select the domain for this instance: Port: This is a MEP in the Port Domain. EVC: This is a MEP in the EVC Domain. 'Flow Instance' is an EVC. The EVC must be created VLAN: This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP the VLAN must be created MPLS Link: This is a MEP in the MPLS Link Domain. MPLS Tunnel: This is a MEP in the MPLS Tunnel Domain. MPLS PW: This is a MEP in the MPLS Pseudo Wires Domain. MPLS LSP: This is a MEP in the MPLS LSP Domain. Mode : Select MEP or MIP: MEP: This is a Maintenance Entity End Point. MIP: This is a Maintenance Entity Intermediate Point. 33763 Rev. G https://www.transition.com Page 337 of 496