Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 193
MAC Address Tables
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide Chapter 12 - MAC Address Tables 12-1 Configuration Switching of frames is based upon the DMAC address contained in the frame. The switch builds up a table that maps MAC addresses to switch ports for knowing which ports the frames should go to (based upon the DMAC address in the frame). This table contains both static and dynamic entries. The static entries are configured by the network administrator if the administrator wants to do a fixed mapping between the DMAC address and switch ports. The frames also contain a MAC address (SMAC address), which shows the MAC address of the equipment sending the frame. The SMAC address is used by the switch to automatically update the MAC table with these dynamic MAC addresses. Dynamic entries are removed from the MAC table if no frame with the corresponding SMAC address has been seen after a configurable age time Web Interface To configure MAC Address Table in the web interface: 1. Click MAC Address Tables and Configuration. 2. Specify Disable Automatic Aging and Aging Time. 3. Specify the Port Members (Auto, Disable, Secure). 4. Specify the Learning-disabled VLANs. 5. Click the Add New Static Entry button and specify the VLAN IP, Mac address, and Port Members. 6. Click Apply. 33763 Rev. G Figure 12-1: MAC Address Table Configuration https://www.transition.com Page 193 of 496