Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 321

Transition Networks SISPM1040-3xxx-L Web User Guide 17-2.3 Groups This page lets you configure SNMPv3 group. The Entry index key are Security Model and Security Name. To create a new group account, click the Add New Group button, enter the group information, and then click Apply. The max number of Groups is 12. To configure SNMP Groups in the web UI: 1. Click SNMP, SNMPv3 and Groups. 2. Click Add New Entry. 3. Specify the SNMP group parameters. 4. Click Apply. Figure 17-2.3: SNMPv3 Groups Configuration Parameter descriptions: Security Model : Indicates the security model that this entry should belong to. Possible security models are: v1: Reserved for SNMPv1. v2c: Reserved for SNMPv2c. usm: User-based Security Model (USM). User Name : At the dropdown select an existing Group Name. Group Name : A string identifying the group name that this entry should belong to. The allowed string length is 1 - 32 characters, and the allowed content is ASCII characters 33 - 126. Buttons Add New Entry : Click to add new entry. Specify the name and configure the new entry. Delete : Check to delete the entry. It will be deleted immediately. Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. Messages: No available User Name, please add community or user first. SNMPv3 has invalid IP address or prefix length 33763 Rev. G https://www.transition.com Page 321 of 496