Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 229
IPMC Profile Address Configuration
View all Lantronix SISPM1040-3166-L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
Transition Networks SISPM1040-3xxx-L Web User Guide 13-4.2 Filtering Address Entry This page provides address range settings used in IPMC profile. The address entry is used to specify the address range that will be associated with IPMC Profile. You can create up to 128 address entries in the system. Web Interface To configure the IPMC Profile Address Configuration in the web interface: 1. Click Multicast, Multicast Filtering Profile and Filtering Address Entry. 2. Click the "Add New Address (Range) Entry" button. 3. Specify Entry Name, Start Address and End Address. 4. Click Apply to save the settings. 5. To cancel the settings click the Reset button to revert to previously saved values. 6. Click "Refresh" to refresh an entry of the MLD Snooping Group Information. 7. Click First Entry/Next Entry to change entries. Figure 13-4.2: IPMC Profile Address Configuration Parameter descriptions: Entry Name : The name used for indexing the address entry table. Each entry must have a unique name composed of 1-16 alphabetic and numeric characters. Start Address : The starting IPv4/IPv6 Multicast Group Address that will be used as an address range. End Address : The ending IPv4/IPv6 Multicast Group Address that will be used as an address range. Buttons Add New Address (Range) Entry : Click to add new address range. Specify the name and configure the addresses. Click "Apply" Delete : Check to delete the entry. The designated entry will be deleted during the next save. Apply : Click to save changes. Reset : Click to undo any changes made locally and revert to previously saved values. First Entry : Updates the table starting from the first entry in the IPMC Profile Address Configuration. 33763 Rev. G https://www.transition.com Page 229 of 496