Lantronix SISPM1040-3166-L Web User Guide Rev G PDF 14.13 MB - Page 287

Transition Networks SISPM1040-3xxx-L Web User Guide Individual Port Security Status : Click the port number to see the status for this particular port. Figure 12-5.2: Port Security Status Parameter descriptions: MAC Address & VLAN ID : The MAC address and VLAN ID that is seen on this port. If no MAC addresses are learned, a single row stating "No MAC addresses attached" is displayed. State : Indicates whether the corresponding MAC address is blocked or forwarding. In the blocked state, it will not be allowed to transmit or receive traffic. Time of Addition : Shows the date and time when this MAC address was first seen on the port. Age/Hold : If at least one user module has decided to block this MAC address, it will stay in the blocked state until the hold time (measured in seconds) expires. If all user modules have decided to allow this MAC address to forward, and aging is enabled, the Port Security module will periodically check that this MAC address still forwards traffic. If the age period (measured in seconds) expires and no frames have been seen, the MAC address will be removed from the MAC table. Otherwise a new age period will begin. If aging is disabled or a user module has decided to hold the MAC address indefinitely, a dash (-) is displayed. Buttons Auto-refresh : Click to refresh the page automatically every 3 seconds. Refresh : Click to manually refresh the page immediately. Clear : Click to remove this particular MAC addresses from MAC table. Port x : Select port that you want to display the Port Security Status. Back : Click to go back Port Security Status. 33763 Rev. G https://www.transition.com Page 287 of 496