Mackie D8B Owners Manual - Page 69
The Plugins Menu, Plugins Ctrl+P
View all Mackie D8B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
The Plugins Menu Plugins (Ctrl+P) • This command opens the Plugin Configuration window. It is here that plug-ins are selected, input sources are chosen to feed plug-ins, stereo or mono modes are selected, and plug-in output destinations are selected. • There are sixteen plug-in slots-four dedicated to each FX card. Card one is allocated plug-in slots 1-4. Card 2 is allocated plugin slots 5-8. Card three is allocated slots 9-12. Card four is allocated slots 13-16. • For each active plug-in, the SLOT number button opens and closes the plug-in window. • MODE toggles between STEREO and MONO when using the UFX card. Each UFX card is divisible into two halves. Either half can be selected as stereo or two-channel mono. In other words, each UFX card can be configured as two stereo, four mono, or one stereo and two mono plugins. • The MODE selection is not applicable to the MFX cards. • MODE selection determines the plug-in options from the UFX card. • Select the desired plug-ins in the PLUGIN column. The available options are dependent on the installed plug-in card(s). • Each of the four card slots is allocated four possible inputs and four possible outputs. MFX cards are automatically configured with two mono inputs, each feeding a separate user-selected effect. Each MFX effect has a stereo output, automatically returning to two faders in the control surface EFFECTS bank. UFX cards offer a potential of four discrete inputs and outputs, configurable into plugin-specific stereo and mono configurations. • When using the MFX card, each mono input feeds a stereo effect; each stereo effect returns to two faders on the EFFECTS bank by default. For example, with an MFX card installed in mixer card slot 1 and selected in the Plugin Configuration window, INPUTs are available at slots 1 and 2. If Aux 1 is selected for SLOT 1, the Aux 1 send feeds the input to Stereo Effect 1, whereas the returns enter the mixer at EFFECTS bank faders 1 and 2. • Once the plug-in is selected, the plug-in-specific input options appear in the INPUT menu. • In addition to an aux send, a plug-in can also receive its input from a channel pre- or post-DSP insert, the main stereo left and right bus, or a Bus 1-8. When a plug-in is inserted "in-line" in this manner, its output is routed directly back into the channel or bus by default. • A plug-in can also receive its input from an FX Return. This allows two or more plug-ins to be chained. For example, assign a plug-in output to its default FX Return, and assign the input source of the next plug-in to the FX Return of the previous plug-in. • In addition to an FX Return, a plug-in output can be routed to a channel pre- or post-DSP insert, the main stereo left and right bus, or a Bus 1-8. Caution: Use extreme caution when assigning plug-in outputs to channel inserts to avoid creating feedback loops! D8B Manual • Chapter 3 • page 63