Netgear MS70 User Manual - Page 72
Change the region of operation, Change the CTS/RTS threshold or preamble mode for a radio
View all Netgear MS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite Change the region of operation You can change the region of operation, which is region in which you operate the router. For some countries or regions, such as North America, you cannot change the region because it is preset. Note: Make sure the country is set to the location where the device is operating. You are responsible for complying within the local, regional, and national regulations set for channels, power levels, and frequency ranges. WARNING: It might not be legal to operate the router in a region other than the regions listed in the menu. If your country or region is not listed, check with your local government agency. To change the region of operation: 1. Launch a web browser from a computer or mobile device that is connected to your mesh network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > Wireless Settings. The Advanced Wireless Settings page displays. 5. From the Region menu, select the region in which the router must operate. 6. Click the Apply button. Your settings are saved. The router restarts with the settings for the new region. Change the CTS/RTS threshold or preamble mode for a radio For most WiFi networks, the clear to send/request to send (CTS/RTS) threshold and preamble mode work fine and we recommend that you do not change the settings. (In general, these settings are intended for WiFi testing.) Manage WiFi Settings 72 User Manual