Netgear MS70 User Manual - Page 87
Set up an IPTV port, admin, ADVANCED > Advanced Setup > VLAN/Bridge Settings
![]() |
View all Netgear MS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings. The VLAN/Bridge Settings page displays. 5. Select the Enable VLAN/Bridge Setup check box. The page expands. 6. Select the Enable VLAN Tag radio button. The page expands. 7. Click the Add button. The Add VLAN Rule page displays. 8. Specify the following settings for the VLAN tag group: • Name. Enter a name for the VLAN tag group. The name can be up to 10 characters. • VLAN ID. Enter a value from 1 to 4094. • Priority. Enter a value from 0 to 7. 9. Select the Port1 check box. 10. Click the Add button. The VLAN tag group is added. 11. Click the Apply button. Your settings are saved. Set up an IPTV port You can set up the router to create an Internet Protocol television (IPTV) port that can lease an IP address from your IPTV service provider. Use this feature only if you subscribe to an IPTV service and your IPTV service requires an intranet address. Some IPTV ports cannot work behind NAT because the IPTV port requires an IP address within the Internet service provider's network (intranet address). You can set up a bridge connection from the WAN port to the LAN port. The LAN port becomes an IPTV port with direct access to the WAN without going through NAT. Manage Network Settings 87 User Manual
![](/manual_guide/products/netgear-mk72-user-manual-6cadc83/87.png)