Netgear MS70 User Manual - Page 84
Set up the router as a WiFi access point
![]() |
View all Netgear MS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite To change the NTP server to your preferred NTP server: 1. Launch a web browser from a computer or mobile device that is connected to your mesh network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Administration > NTP Settings. The NTP Settings page displays. 5. Select the Set your preferred NTP server radio button. 6. Enter the NTP server domain name or IP address in the Primary NTP server field. 7. Click the Apply button. Your settings are saved. Set up the router as a WiFi access point You can set up the router to run as an access point (AP) on the same local network as another router. To set up the router as an AP: 1. Use an Ethernet cable to connect the Internet port of this router to an Ethernet port on the other router. 2. Launch a web browser from a computer or mobile device that is connected to your mesh network. 3. Enter http://www.routerlogin.net. A login window opens. 4. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 5. Select ADVANCED > Advanced Setup > Wireless AP. The Wireless AP page displays. Manage Network Settings 84 User Manual
![](/manual_guide/products/netgear-mk72-user-manual-6cadc83/84.png)