Netgear MS70 User Manual - Page 86
Set up a bridge for a VLAN tag group, ADVANCED > Advanced Setup > VLAN/Bridge Settings
![]() |
View all Netgear MS70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite To configure a port group and enable the bridge: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. A login window opens. 3. Enter the router admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings. The VLAN/Bridge Settings page displays. 5. Select the Enable VLAN/Bridge Setup check box. The page expands. 6. Select the By bridge group radio button. The page expands. 7. Select the Port1 check box. 8. Click the Apply button. Your settings are saved. Set up a bridge for a VLAN tag group If the device that is connected to the router's Ethernet LAN port includes an IPTV device, your ISP might require you to set up a bridge for a VLAN tag group for the router's Internet interface. If you are subscribed to IPTV service, the router might require VLAN tags to distinguish between the Internet traffic and the IPTV traffic. A bridge with a VLAN tag group prevents packets that are sent between the IPTV device and the router's Internet port from being processed through the router's network address translation (NAT) service. You can add VLAN tag groups to a bridge and assign VLAN IDs and priority values to each VLAN tag group. To add a VLAN tag group and enable the bridge: 1. Launch a web browser from a computer or mobile device that is connected to the router network. 2. Enter http://www.routerlogin.net. Manage Network Settings 86 User Manual
![](/manual_guide/products/netgear-mk72-user-manual-6cadc83/86.png)