Oki MC561MFP MC361, MC561, CX2731MFP Advanced User's Guide - Page 300
Use a USB 2.0, compatible cable., Use an Ethernet, 10BASE-T/100BASE, The Ethernet or USB
View all Oki MC561MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
Symptom Cause Remedy The MFP does not start printing. An error is displayed on the panel. The Ethernet or USB cable is unplugged. Something is wrong with the Ethernet or USB cable. The MFP does not support your Ethernet or USB cable. Check the error code and follow the on-screen instructions. Plug in the Ethernet or USB cable firmly. Use another Ethernet or USB cable. • Use a USB 2.0 compatible cable. • Use an Ethernet 10BASE-T/100BASETX compatible cable. The display screen is blank. Something may be wrong with the printing function. The interface is disabled. The printer driver of the MFP is not selected. The specified port of the printer driver is wrong. The MFP is in the sleep mode. Press the key and select [Reports] > [Configuration] and print out the configuration list to check the printing performance. Press the key and select [Admin Setup] > [Network Menu] > [Network Setup] and enable the interface you are using. Set the printer driver of the MFP as the default printer. Specify the port the Ethernet or USB cable is connected to. Check if the key lights up and press the key to activate the MFP. 300 - Issues: MFP Issues MC361/MC561/CX2731 MFP Advanced User's Guide