Oki MC561MFP MC361, MC561, CX2731MFP Advanced User's Guide - Page 45
Fcode Polling Using a Sub Address, Fcode Transmission
View all Oki MC561MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
10 Press the up arrow key to select [Add destination], then press . 11 Specify a destination. 12 Press the key. Fcode Polling Using a Sub Address You can perform Fcode polling by entering the sub address of a sender MFP's bulletin box. This function makes a remote fax MFP transmit a fax in response to instructions from your MFP. Note You cannot receive data if the sender has a password on the bulletin box. 1 Press the key. 2 Make sure that [Fax] is selected and press to open the fax standby screen. 3 Press the down arrow key to select [Fax Functions], then press . 4 Press the down arrow key to select [Fcode Polling], then press . 5 Press the down arrow key to select [ON], then press . 6 Enter the sub address of the bulletin box registered in the sender MFP. 7 Use the arrow keys to select [Enter], then press . 8 Press the left arrow key to go back to the start screen. 9 Press the up arrow key to select [Add Destination], then press . 10 Specify a destination. 11 Press the key. 45 - Faxing: Fcode Transmission MC361/MC561/CX2731 MFP Advanced User's Guide