Oki MC770 MC770/780 User Guide - Troubleshooting - Page 74
holder to its original, Return the document
View all Oki MC770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Moving or Transporting the Machine 6 Use vinyl tape to cover the junction of the image drum cartridge and toner cartridge. Do this on each of the four image drum 1 cartridges, then put them back in the machine in their original positions. Note • The image drum cartridges should be kept inside the machine when transporting. Seal them with vinyl tape to prevent toner from spilling. 2 Vinyl Tape (back side as well) 7 Close the top cover. 3 9 Separate the main printer unit from any additional tray units. If there are no additional tray units, proceed to step 10. The separation procedure is the exact opposite of installation. For more information, refer to the Setup Guide. 10 Protect the machine with cushioning material. Note • Use the original box, packaging, and cushioning material that came with your machine at the time of purchase. Memo • When setting up the machine again after transport, be sure to remove the tape from each of the image drum and toner cartridges. 11 At least three people should lift the machine unit and place it in the box. 4 Top cover 5 8 Return the document holder to its original position. Document holder 6 7 - 74 -