Ricoh Aficio SP 204SN User Guide - Page 123
Low Humidity Mode, Registration, Tray 1, Bypass Tray, Adjust Image Density, Horizontal -6 to +6 mm
View all Ricoh Aficio SP 204SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
System Settings • • • (Needs replacing) If [Toner End Option] is set to [Continue Printing], "**" is displayed instead of the indicator above. Toner levels are always displayed for Type 3 models. Low Humidity Mode When the machine is used in a low humidity environment, black stripes with a few millimeters width may appear. Selecting [On] should prevent such black stripes from appearing. Default: [Off] • On • Off Registration Adjusts the position of the input tray. Adjust the value by using the [ ] or [ ] key. To check the registration, print a test page. Tray 1 Adjusts the position of Tray 1. Default: [0] • Horizontal (-6 to +6 mm, in 1 mm increments) • Vertical (-6 to +6 mm, in 1 mm increments) Bypass Tray Adjusts the position of the bypass tray. Default: [0] • Horizontal (-6 to +6 mm, in 1 mm increments) • Vertical (-6 to +6 mm, in 1 mm increments) Adjust Image Density Adjusts the density of printing. Default: • (Lightest) • • • • • 121