Ricoh Aficio SP 204SN User Guide - Page 24
Assigning the machine's IPv6 address manually, how to launch Web Image Monitor
View all Ricoh Aficio SP 204SN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
1. Guide to the Machine Assigning the machine's IPv6 address manually • The IPv6 address assigned to the machine must not be used by any other device on the same network. • Make sure [DHCPv6] is set to [Disable] in [IPv6] in Web Image Monitor. For information about how to launch Web Image Monitor, see page 129 "Using Web Image Monitor". 1. Press the [User Tools] key. CTT129 2. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. 3. Press the [ ] or [ ] key to select [Machine IPv6 Address], and then press the [OK] key. 4. Press the [ ] or [ ] key to select [Use IPv6], and then press the [OK] key. 5. Press the [ ] or [ ] key to select [On], and then press the [OK] key. If this setting is changed, the machine will reboot automatically before the procedure is complete. When this happens, wait for the reboot to finish, repeat Steps 1 to 3, and then proceed to the next step. 6. Press the [ ] or [ ] key to select [Manual Config. Add.], and then press the [OK] key. 7. Press the [ ] or [ ] key to select [IP Address], and then press the [OK] key. 8. Enter the machine's IPv6 address using the number keys. 9. Enter the values in all fields, and then press the [OK] key. If this setting is changed, the machine will reboot automatically before the procedure is complete. When this happens, wait for the reboot to finish, repeat Steps 1 to 3, and then proceed to the next step. 10. Press the [ ] or [ ] key to select [Prefix Length], and then press the [OK] key. 11. Enter the prefix length using the number keys, and then press the [OK] key. After a setting is changed, the machine automatically reboots itself. 22