Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 127

To change the settings of menu items Proceed as follows to change the settings of menu items. 1 Use the PUSH SET(S.SEL) knob to select the required item. Example: Screen display when item 005 DISPLAY INFORMATION SELECT is selected Current setting KEY PARAMETER 0O1:P-ROLL TIME - 5 s 002:CHARA H-POS - 0A 003:CHARA V-POS - 2E *005:DISPLAY SEL - T&CNT 006:LOCAL ENA - st&ej 007:DISC TIMER - +-12H 009:CHARA TYPE - white 011:CHARA SIZE - x1 012:COND DISPLY - dis 013:SYSTEM FREQ - off 016:ALARM - on 2 Press the PUSH SET(S.SEL) knob or the SELECT function button (F2). This displays the setting screen 2 for the menu item selected in step 1. Example: Setting screen display when item 005 DISPLAY INFORMATION SELECT is selected ITEM-005 DISPLAY INFORMATION SELECT time data & CNT Current setting 3 Use the PUSH SET(S.SEL) knob or the +/- function button (F3 or F4) to change the setting. Turning the PUSH SET(S.SEL) knob while holding down the SHIFT button increases the increment of adjustment. 4 To change other settings, press the PUSH SET(S.SEL) knob or the SELECT function button (F2) to return to the previous screen, then repeat steps 1 to 3. 5 When you have completed the settings, press the SAVE function button (F5). The message "NOW SAVING..." appears on the video monitor display, and "Saving..." appears in the time data display area, while the new settings are saved in memory. When the saving operation is completed, the video monitor display and the time data display area return to their normal indications. Notes • If you power off the unit before a save operation is completed, settings may be lost. Wait until the save is completed before powering off the unit. • If, instead of pressing the SAVE function button (F5), you press the MENU button, the new settings are not saved. The message "ABORT !" appears on the video monitor display and "Abort !" in the time data display area for about 0.5 seconds, and the system exits the menus. To change more than one setting, be sure to press the SAVE function button (F5) after making the settings. To return menu settings to their factory default settings After changing menu settings, use the following procedure to return the settings to their factory default settings (setting initialization). To return a particular setting to its factory default setting In the screen that selects the setting of that item, press the RESET/RETURN button. For example, proceed as follows to return the 005 DISPLAY INFORMATION SELECT item to its default setting. This assumes that the setting has been changed from the factory default "time data & status" in step 3 of the procedure in "To change the settings of menu items" (page 127). 1 Press the RESET/RETURN button. "time data & status" (factory default setting) is selected. 2 Press the SAVE function button (F5). The setting returned to its factory default is saved in memory as the current setting. To return all settings to their factory default settings 1 Press the MENU button to display the setup menu. 2 Press the RESET/RETURN button. A message appears, to confirm whether you wish to return all settings to their factory default settings. Message on the video monitor display Message in the time data display area Initialize all items to factory preset values? Init setup? Chapter 7 Menus Setup Menu 127