Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 139

139

Setup Menu

Chapter 7

Menus

807

AUDIO OUTPUT PHASE

Set the output timing of digital audio playback signals (HDSDI, SDI, AES/

EBU only), with 80H as a reference position. Output timing is earlier for

values smaller than 80H and later for values greater than 80H. (80H, 128

samples = approx. 2.7 ms, 80H, 1 sample = approx. 20

μ

s)

0 (0 (HEX))... 80 (80 (HEX))

... FF (FF (HEX)):

Values can be set in this

range.

808

INTERNAL AUDIO SIGNAL

GENERATOR

Select the operation of the internal audio test signal generator.

silnc (silence)

: Silent signal.

1kHz (1kHz sine)

: 1 kHz, –20 dB FS sine wave signal.

When you set the A1 INPUT item on page P2 AUDIO of the function

menu to “SG”, the internal signal generator operates and outputs

simultaneous test signals to channels 1 to 8

(see page 49)

.

815

AUDIO SAMPLING RATE

CONVERTER

Select the mode of operation of the sampling rate converter for AES/

EBU input to channels 1 to 4.

off

: Do not operate.

on

: Operate.

819

[F1600]

AUDIO INPUT ARRANGE

Set up mixing of audio signals.

For details, see “To set up mixing of audio input signals” (page 61).

823

NON-AUDIO FLAG PB

Control non-audio flags in digital audio output.

Sub-item

1

CH1/CH2

During playback (except E-E mode), set non-audio flags in digital audio

output to the following states.

on:

Set to on (data is non-audio.)

auto

:

Set as follows.

•

When data is read from disc and confirmed: Follow the data.

•

When data from disc is not confirmed: Maintain current state.

2

CH3/CH4

3

CH5/CH6

4

CH7/CH8

824

ANALOG LINE OUTPUT SELECT

Select the analog audio signals (tracks 1 to 8) to be assigned to audio

output channels 1 and 2.

tr1/2

: Tracks 1 and 2 assigned to audio output channels 1 and 2.

tr3/4


tr5/6


tr7/8


827

AES/EBU AUDIO OUTPUT SELECT

Select the audio signals to assign to AES/EBU audio output channels.

Sub-item

1

CH1/CH2

tr1/2


tr3/4


tr5/6


tr7/8


2

CH3/CH4

tr1/2


tr3/4


tr5/6


tr7/8


828

SDI AUDIO OUTPUT SELECT

Select the audio signals to assign to SDI audio output channels.

Sub-item

1

CH1/CH2

tr1/2


tr3/4


tr5/6


tr7/8


2

CH3/CH4

tr1/2


tr3/4


tr5/6


tr7/8


831

TS OUT AUDIO MODE

a)

Select the number of output channels for i.LINK TS (HDV) signals.

4ch:

4 channels

2ch

:

2 channels

Menu items in the 800s, relating to audio control

Item number

Item name

Settings

Section	Page
Table of Contents	6
Chapter 1 Overview	11
Marks for Model-Specific Functions	11
Features	11
Features of this unit	11
System Configurations	15
Using the CD-ROM Manual	16
Preparations	16
Reading the CD-ROM manual	16
Chapter 2 Names and Functions of Parts	17
Front Panel	17
Display window	23
Rear Panel	28
Chapter 3 Preparations	32
Preparing Power Sources	32
Supplying power	32
Attaching a battery pack	32
Initial Setup	33
Front Panel Tilt Mechanism	35
Connections and Settings	36
Connections for using PDZ-1 Proxy Browsing Software	36
Connections for cut editing	37
Using the editing functions of the recorder (controlling through REMOTE(9P) connector)	41
Connections for pool coverage	41
Synchronization Reference Signals	42
Setting System Frequency	43
Setting Timecode	43
Superimposed Text Information	45
Basic Operations of the Function Menu	48
Function menu operations	48
Function menu settings	48
Handling Discs	52
Discs used for recording and playback	52
Notes on handling	52
Write-protecting discs	53
Loading and unloading a disc	53
Formatting a disc	53
Chapter 4 Recording and Playback	54
Recording	54
Mixed recording of clips in different formats on the same disc	54
Preparations for recording	54
Carrying out recording	55
Continuing recording while exchanging discs (disc exchange cache function)	56
Recording with the HDSDI remote control function	57
Recording with the Clip Continuous Rec function	57
Handling of discs when recording does not end normally (salvage functions)	58
Linear Editing	59
Overview	59
Connections	60
Preparations for editing	60
Editing operations	61
Playback	62
Playback operation	63
Playback operations using thumbnails	65
Chapter 5 Operations in GUI Screens	66
Overview	66
Switching between GUI screens	66
Information and controls in thumbnail screens	67
Displaying menus	70
GUI screen operations	73
Thumbnail Operations	74
Selecting thumbnails	74
Searching with thumbnails	75
Playing the scene you have found	77
Selecting clips by type (Filter Clips function)	77
Selecting the information displayed on thumbnails	79
Changing clip index pictures	79
Checking clip properties	80
Setting clip flags	82
Locking (write-protecting) clips	83
Deleting clips	83
Scene Selection (Clip List Editing)	85
What is scene selection?	85
Creating and editing clip lists	86
Managing clip lists	90
Disc Operations	92
Checking disc properties	92
Using planning metadata	92
Checking user-defined essence marks	93
Formatting discs	94
Displaying disc and clip properties in a web browser	94
Transferring clips (Direct FTP function)	97
Preparations for clip transfers	97
Uploading clips	98
Downloading clips	101
Copying clips directly between XDCAM devices	102
Shortcut List	103
Chapter 6 File Operations	104
Overview	104
Directory structure	104
File operation restrictions	105
Assigning user-defined clip titles	107
Assigning user-defined clip and clip list names	109
File Operations in File Access Mode (for Windows)	110
Making FAM connections	111
Operating on files	111
Exiting file operations	111
File Operations in File Access Mode (for Macintosh)	112
Making FAM connections	112
Operating on files	113
Exiting file operations	113
FTP File Operations	114
Making FTP connections	114
Command list	115
Recording Continuous Timecode with FAM and FTP Connections	120
Chapter 7 Menus	121
Menu System Configuration	121
Setup Menu	121
Items in the basic menu	122
Basic menu operations	126
Items in the extended menu	129
Extended menu operations	142
Maintenance Menu	144
Items in the maintenance menu	144
Maintenance menu operations	148
Chapter 8 Planning Metadata	151
Overview	151
Manipulating planning metadata	151
To set clip names by using planning metadata	151
Setting essence mark names by using planning metadata	152
Appendix	154
Important Notes on Operation	154
Condensation	154
About the LCD panel	154
Periodic Maintenance	155
Digital hours meter	155
Troubleshooting	157
Alarms	157
Error messages	167
To eject discs with the unit powered off	167
Specifications	167
Using PDZ-1 Proxy Browsing Software	170
Using UMID Data	171
Ancillary Data	173
Ancillary data in HDSDI signals	173
Ancillary data in MXF files	173
General MXF metadata	173
Correspondence between Setting Items of the HKDV-900 and Setup Menu of This Unit	174
List of Supported USB Keyboards	175
Trademarks and Licenses	178
MPEG-4 visual patent portfolio license	178
MPEG-2 video patent portfolio license	178
About IJG (Independent JPEG Group)	178
Character display software “iType”	178
About net-snmpd	178
About libupnp	181
Glossary	182

Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 139

silnc silence, 1kHz 1kHz sine, tr1/2, tr3/4, tr5/6, tr7/8, Menu items in the 800s

Page 139 highlights