Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 62
Playback, Carrying out clip editing, Clip playback modes
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 4 Recording and Playback • If the OUT point is set within the final clip, in assemble editing the length of the clip does not change. Carrying out clip editing To carry out clip editing, use an RM-280 or similar editing controller. For details of how to set edit points and carry out editing, refer to the operation manual for the editing controller. Note If an assemble edit command is received while maintenance menu item M393: AUDIO DSP is set to "AGC/limiter", the unit creates a new clip and performs normal recording. Essence marks recorded by clip editing "CUT" is recorded as an essence mark at the IN and OUT points of video insert editing, and at the IN point of assemble editing. By selecting "CUT" in the essence mark selection screen, you can search the result of editing. For details of searching using essence marks, see page 76. Playback This section describes playback of video and audio on the unit. Before starting playback, make the following settings and adjustments. Selection of time data to display: Select with CNTR SEL on HOME page of the function menu. Selection of audio channels to monitor: Select with MONITR L and MONITR R on page P2 AUDIO of the function menu. Volume adjustment of the monitor audio: Adjust with the LEVEL knob. Remote/local setting: Set the remote control switch. If you set it to REMOTE, also set setup menu item 214 REMOTE INTERFACE ("RM-" and the connector used appear on the display) (see page 131). Clip playback modes You can set the clip playback mode to either of the following. Continuous playback mode: The playback target is all of the clips on the disc (factory default setting) Single clip playback mode: The playback target is the currently selected clip only To select single clip playback mode Set setup menu item 154 SINGLE CLIP PLAY MODE to "on". Playback in single clip playback mode Playback stops when it reaches the start or end of the clip. The next and preceding clips are not played, even if they exist on the disc. The available playback types include normal playback, high-speed playback in the forward or reverse directions, and jog, shuttle, and variable playback. When this unit is set to repeat playback mode, the selected clip only is played repeatedly. To move to another clip, press the PREV, NEXT, SHIFT + PREV, or SHIFT + NEXT button, or perform a thumbnail search. Pulldown playback When this unit's system frequency is set to 1080/59.94i, 1080/29.97P, or 720/59.94P, clips recorded as 1080/ 23.98P are converted by 2-3 pulldown before playback (pulldown playback). Timecode in pulldown playback During pulldown playback, timecode is also converted to 30 frames to match the output video signals. The upper row of the time data display area displays the original 24-frame timecode, and the lower row displays the 30-frame timecode. 62 Playback