Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 150
To set the communications speed and, protocol, To return to the factory default setting
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
To return to the factory default setting Press the RESET/RETURN button. 4 When all digits are set, press the SAVE function button (F5). This returns to the NETWORK menu. 5 Repeat steps 1 to 4 as required, to set the subnet mask and default gateway. 6 In the NETWORK menu, press the SAVE function button (F5). 7 When the "NOW SAVING..." message vanishes, power the unit off and then on again with the on/ standby button. 2 Press the PUSH SET(S.SEL) knob. The communications protocols (AUTO, Full Duplex, Half Duplex) appear, and the arrow flashes. 3 Press the PUSH SET(S.SEL) knob or use the V/ MARK1 or v/MARK2 button to select a communications protocol. To return to the factory default setting Press the RESET/RETURN button. 4 Press the SAVE function button (F5). This returns to the NETWORK menu. To set the communications speed and protocol Set the communications speed (LINK SPEED) and communications method (DUPLEX) to match the network environment. To set the communications speed and communications protocol, proceed as explained in the previous section "To display the maintenance menu" to display the NETWORK menu and then proceed as follows. Contact your network administrator if you have any questions about the proper settings for these items. To set the communications speed 1 Select maintenance menu item M5: NETWORK >M54: LINK SPEED. 2 Press the PUSH SET(S.SEL) knob. The communications speeds (AUTO, 10Mbps, 100Mbps, and 1000Mbps) appear, and the arrow flashes. 3 Press the PUSH SET(S.SEL) knob or use the v/ MARK1 or V/MARK2 button to select a communications speed. To return to the factory default setting Press the RESET/RETURN button. 4 Press the SAVE function button (F5). This returns to the NETWORK menu. To set the communications protocol 1 Select maintenance menu item M5: NETWORK >M55: DUPLEX. Chapter 7 Menus 150 Maintenance Menu