Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 43
Setting System Frequency, Setting Timecode
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3 Preparations Setting System Frequency This unit can record and play back video at the system frequencies of 59.94i, 50i, 29.97P, 25P, and 23.98P 1) (1080) or 59.94P and 50P (720). 1) HD1500 When the PDBK-F1500 option is installed. Selecting the system frequency 1 Set setup menu item 013 SYSTEM FREQUENCY SELECT MENU to "on" and press the PUSH SET(S.SEL) knob. The system frequency selection screen appears. RETURN + SAVE EXIT SYSTEM FREQUENCY SELECT 1080/59.94i If the System Frequency setting is changed, Turn power off and on again. SETUP 2 Turn the PUSH SET(S.SEL) knob to select the system frequency to be used. RETURN + SAVE SYSTEM FREQUENCY SELECT 1080/50i Push F5(SAVE) Key!! EXIT SETUP 3 Press the PUSH SET(S.SEL) knob or the SAVE function button (F5). The message "Turn off/on POWER!!" appears. 4 After pressing the on/standby button to power off the unit, power it on again. Setting Timecode There are the following four ways of recording timecode: Internal Preset mode: This records the output of the internal timecode generator, set beforehand to an initial value. The following run modes can be selected. • Free Run: Timecode advances continually. • Rec Run: Timecode advances only during recording. Internal Regen mode: This records the output of the internal timecode generator, initialized to timecode following continuously upon the timecode of the last frame of the last clip on the disc. External Regen mode: This records the output of the internal timecode generator, synchronized to an external timecode generator. As the external input, the timecode input to any of the following connectors can be selected. • TIME CODE IN connector: LTC • SD/HDSDI INPUT connector: VITC and LTC • (i.LINK) S400 connector: TC External Preset mode: This directly records the input of an external timecode generator. As the external input, the timecode input to any of the TIME CODE IN connector can be selected. To record timecode after setting an initial value (Internal Preset) Proceed as follows with the function menu. For setting the timecode, set TCG on page P5 TC of the function menu to INT and PRST/RGN to PRESET. Time data display area Function menu Function buttons Setting an initial timecode value 1 Press the CNTR SEL function button on the HOME page of the function menu, and select TC. 43 Setting System Frequency / Setting Timecode