Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 146
Sub-item, 9LINE to 20LINE, M4: SETUP MAINTENANCE: items relating to the setup menu, Setting, DISABLE
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Item M3B: VANC RX M3B0: VANC RX PARAMETER PACKET Sub-item 1 LINE 2 DID 3 SDID M3B1: LINE1 SEL M3B2: LINE2 SEL M3C: POWER SAVE CONTROL M3D: DATE/TIME PRESET M3E: USB MEMORY UTIL M3F: FACTORY SETUP M3: OTHERS: Other setting items Setting For setting HDSDI VANC data input parameters Notes • In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the corresponding line in the second field (for example, if line 9 is selected, line 527 is also selected for VANC packet reception). • Menu item M3B0 enables recording of one VANC packet when the selected line contains any packets whose DID/SDID matches the value set with this menu item. • Up to four packets are recorded per each line regardless of the DID and SDID for the VANC set with menu item M3B1 or M3B2.Menu items M3B1 and MSB2 enable recording of up to four VANC packets in the selected line, respectively, regardless of the DID/SDID value. • It is not possible to set the same line with menu items M3B0, M3B1, and M3B2. If the same line is specified, priority is given in the order of M3B0, M3B1, and M3B2 (for example, if the same line is specified with M3B0 and M3B1, the setting with M3B1 is ignored). • When VANC data is output to HDSDI playback signals, the number of the output VANC line is the same as that of the input VANC line. • When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or essence mark output takes priority. To disable UMID or essence mark output, set setup menu item 651 or 657 to "off". Selects the lines for the VANC to be received. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) Specification of the DID of the VANC to receive 00h-FFh Specification of the SDID of the VANC to receive 00h-FFh Selects the lines to be received for the HDSDI VANC data. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) Selects the lines to be received for the HDSDI VANC data. OFF, 9LINE to 20LINE (59.94i/50i/29.97P/25P/23.98P mode) OFF, 9LINE to 25LINE (59.94P/50P mode) Specification of whether to enable the power saving function OFF, ON Specification of the date and time For installation of software upgrade For details, refer to the Maintenance Manual. For details, refer to the Maintenance Manual. Item M40: EXTENDED MENU M41: CUSTOMIZE M4: SETUP MAINTENANCE: items relating to the setup menu Setting Select whether to display the extended menu. DISABLE: Do not display. ENABLE: Display. Select whether to enable the customization function of the setup menu. DISABLE: Do not display. ENABLE: Display. Chapter 7 Menus 146 Maintenance Menu