Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 24
Meter display mode, Level bars
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 2 Names and Functions of Parts . Display ANA-1 ANA-2 MIC-1 MIC-2 AES/EBU HD-SDI SD-SDI SG No indication Input signal Analog audio signal Channel 1, 3 Channel 2, 4 Input signal from Channel 1, 3 the microphone connected to Channel 2, 4 ANALOG AUDIO INPUT connector AES/EBU format digital audio signal (flashes when there is no input signal) HDSDI audio signal (flashes when there is no input signal) SDSDI audio signal (flashes when there is no input signal) Test signal from the internal signal generator Undefined audio signal, or no audio input B Data indication: Appears when the input signals are non-audio signals. C F1600 Mixing: Displays the input channels used for audio mixing. (These channels are selected with setup menu item 819 AUDIO INPUT ARRANGE.) D Monitor channel: Displays the audio monitoring channels set with MONITR L and MONITR R on page P2 AUDIO of the function menu (see page 49). E Audio channel: Displays the audio channels. Also indicates preset or variable mode by its color (see page 18). White: Preset mode Green: Variable mode F Reference level: Displays the reference level for recording as set in the maintenance menu. G Level bars: Display the audio recording or playback levels of channels 1 to 8. The OVER indicators light when the audio level exceeds 0 dB. H Meter display mode: Displays the audio level meter display mode selected with AU METER on page P4 AUDIO of the function menu (see page 50). b Function menu Use the PAGE/HOME button to display this menu, and to switch between the pages (HOME, P1 to P7, (P8) 1), (HOME2) 1) ) of the menu. Each page has three to six setting items. Press the corresponding button to change a setting. 1) If a menu item is assigned using maintenance menu item M38: F-KEY CONFIG For details, see page 48 "Basic Operations of the Function Menu" in Chapter 3. c Clip information Displays clip information. All remaining clips or clip list playback time Total number of clips recorded on disc PDW-HD1500 001/001 000:00 Clip name Number of current clip d Recording format Displays the system frequency and the video and audio formats. 59.94i HD422-1080 50Mbps 8CH-24BIT Video format System frequency Audio format e Time data display area A Remaining disc recording capacity B Rec Run/Free Run C Timecode generator mode D VITC E Time data type F Time data G Recording mode indication A Remaining disc recording capacity: Displays the amount of recording capacity remaining on the disc. B Rec Run/Free Run: Displays the timecode run mode. The run mode is set with RUN MODE on page P5 TC of the function menu (see page 51). C Timecode generator mode: Displays the timecode source and generation method (preset or regenerate). These are set with PRST/RGN and TCG on page P5 TC of the function menu (see page 51). D VITC: Lights in the following cases. • When VITC is read in playback mode. (This has no relations to the display in the time data display area.) • When VITC recording is possible. E Time data type: Displays the type of time data displayed in the time data display area. The type of time data is selected with CNTR SEL on the HOME page of the function menu (see page 48). 24 Front Panel