Sony PDWHD1500 User Manual (PDW-HD1500 / F1600 Operation Manual for Firmware V - Page 165
Alarms relating to audio and video signals, Alarms relating to sensors and drives, data display area
View all Sony PDWHD1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Alarm message in GUI screen Description/action Not Loaded. This appears when a command related to planning metadata is executed with no planning metadata loaded. Load planning metadata and try again. Syntax Error! This appears when loading of planning metadata fails because of a syntax error. Correct the syntax error and try loading the metadata again. Irregular Disc is Used. Use Professional Disc. This appears when the unit is unable to record or play the inserted disc. This unit can record and play Professional Discs. Insert a Professional Disc. The Disc Write Protect TAB This appears when an attempt is made to format a write-protected disc. is set to Save. Try formatting the disc after moving the write protect tab away from the Save position. The REC Inhibit Mode is Selected. Check Function Menu. This appears when an attempt was made to format when function menu item HOME >F3: REC INH is set to "ON". Set F3: REC INH to "OFF" and try formatting again. Auto Formatting was not Completed. This appears when auto formatting fails. Video Resolution Differ from This appears when an attempt is made to add a clip to a clip list containing clips with a different it on Clip List. video resolution (number of system lines). It is not possible to add clips to clip lists containing clips with a different video resolution. No Clip Meets the Condition. This appears when no clip is found to meet clip filtering conditions. Alarms relating to audio and video signals Alarm message in time data display area No INPUT! a) EMPHASIS! a) REF NON-STD Alarm message in video monitor screen Action INPUT VIDEO IS NOT DETECTED. CHECK THE VIDEO INPUT MODE AND SUPPLY A VIDEO SIGNAL TO VIDEO INPUT. • Check the setting of V INPUT on Page P1 VIDEO of the function menu (see page 49). • Input an HDSDI signal. INPUT AUDIO EMPHASIS IS NOT SUPPORTED. CHECK THE EMPHASIS OF THE AUDIO INPUT SIGNAL. Check the emphasis of the audio input signal. A NON-STANDARD REF SIGNAL IS BEING USED FOR REF VIDEO. USE A STANDARD SIGNAL. Input a standard signal. a) Displayed only when setup menu item 016 ALARM DISPLAY is set to "on". Alarms relating to sensors and drives Alarm message in time data display area FAN Stopped DR-FAN Stop N-FAN Stop High TEMP! HUMID! BATT EMPTY! Alarm message in video monitor acreen Description/action FAN MOTOR STOPPED. Contact a Sony service representative. DRIVE FAN MOTOR STOPPED. FAN MOTOR ON NET-4 BOARD STOPPED. HIGH TEMPERATURE. Note The unit will not stop operating, but if you continue to use it in this state temperatures inside the unit or the drive will rise, possibly resulting in failure or fire. HIGH TEMPERATURE IN DRIVE. HIGH TEMPERATURE ON NET-4 BOARD. MOISTURE HAS BEEN DETECTED. Stop recording or playback, power the unit off and on again, and wait until the HUMID display disappears. BATTERY EMPTY! Change the battery. Appendix 165 Troubleshooting