TRENDnet TV-IP762IC User Guide - Page 46
Micro SD Card
View all TRENDnet TV-IP762IC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
TRENDnet User's Guide After selecting the Sound option as the Trigger by event, the following can be configured. TV-IP762IC When selecting the Video option, the following can be configured. Selecting Sound, will tell the camera only to record when sound is detected. Tick the Schedule option to only record video when sound is detected at specific times of the week. Tick the Day and enter the Start and End times. In the Recording Type section, you can configure the following. Enter the Pre-event recording and Post-event recording time values in the respective fields provided. When selecting the Snapshot option, the following can be configured. Selecting this option will tell the camera to only take a snapshot (an image capture) of the video feed when the abovementioned criteria are met. Enter the Interval value in the space provided. The interval value means that a snapshot will be taken at every interval configured. Only Profile 3 can be used for this selection. Selecting this option will tell the camera to record a video clip when the abovementioned criteria are met. Select the video profile (Source) that will be used for the recording. Select the File Format that the recording will be saved as. File formats available are AVI and MP4. Select the Recording clip time value between 1 and 6 minutes. This will split the total recording into smaller separate files for the duration of the recording. In the Target section, you can configure the following. After selecting Micro SD Card as the recording Target, the recording will be saved on the micro SD card installed in the camera. Enter the Keep Free Space value that is needed on the micro SD card. Tick the Recycle option to record until the space is filled on the micro SD card and then to record over the oldest recordings found on the card. © Copyright 2013 TRENDnet. All Rights Reserved. 46