Brother International BAS-411 Instruction Manual - English - Page 104

[13 ENTER (t] 4 14) 3. Using the jog keys , move the hoop and the holder base to the desired position. Press the key to enter the first point. [NOTE] Do not forget to press the key after moving the hoop. 4. Using the jog keys , move the hoop and the holder base to the desired position. Press the key to enter the second point. Enter the third point to the last point (in this example, the last point is indicated as N) in the same way. [NOTE] Up to 10 points can be entered. To make the spline, at least 4 points should be entered. ENTER 2 I EDIT 4 5. After entering all the points, press the key. The hoop and the holder base move to the first point and stops there. The Curve No. "2" will be indicated with a positive number, indicating that the registration is complete. [NOTE 1] If the key is pressed here, the machine will trace the spline connecting entered points. [NOTE 2] If the key is pressed here, the previously entered points will be cancelled and the machine goes back to step 3. (Press this key when you want to re-enter the line.) Tracing C Go to step 3. -100-