Brother International BAS-411 Instruction Manual - English - Page 11
Removing, bobbin, Replacing, Attaching, needle
View all Brother International BAS-411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1. Removing bobbin case 2. Replacing bobbin .! it 3. Attaching bobbin case a Pull out about 10 cm of thread. 1) Open the rotary hook assembly cover 0. 2) Hold the knob @ and remove the bobbin case. 3) Close the knob and remove the bobbin Q. 0 The thread should gm be wrapped to the 0 right around the bobbin. 1) Put the bobbin in the bobbin case. 2) Slide the thread under the tension spring Q through the notch O. 3) Pull out the thread from the thread hole and pass it through the hook ®. 4) Pull out the thread about 50mm. 1) Hold the knob @ and attach the bobbin case. 2) Close the cover 0. The standard tension of the bobbin thread should be about 20-30g. CN 0 Materials and needle selection Fabric type Needles Needle numbers Denim Leather Handkerchief Shirt Towel DB x K5 #14, #16, #18 #9-#10 #11, #12, #13 1. Removing needle Loosen the thumb screw 0 and remove the needle (;4. 2. Attaching needle With the flat side facing the front, insert the needle all the way until it meets the end of the needle bar. Tighten the thumb screw 0 firmly. [NOTE] Set the needle so that the notched part comes on the rotary-hook side. [NOTE1] [NOTE2] When using special threads such as the gold, silver and rams yarn, use a heavy-duty needle (#11-#16). For better finishing, paste the waxed paper on the back of the material. For general materials, use DB x K5 #11 to #18 according to the thickness of the material. For knitted materials, use DB x K23 #11. Its round end prevents the knit thread from breaking. -7-