Brother International BAS-411 Instruction Manual - English - Page 7
Carrying, machine, Installing, operation, panel
View all Brother International BAS-411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
tl S After installing, get the power supply from an dedicated outlet . Carrying machine When holding the machine, be sure to hold the machine body (frame). [NOTE] Do NOT hold the table or the guard bar. Ell Installing machine 1) Secure the level adjusters 0 so that the upper surface of the table is horizontal. 2) If the table wobbles, loosen the nuts @ and turn the level adjusters 0 to adjust. When moving the machine, lift the level adjusters 0 so that the machine can be moved by the casters ID on the machine body. E: Installing operation panel cord holder 1) Attach the keyboard cable and the grounding wire 0 to the keyboard stand ® with screws and the cord holder. 2) Attach the keyboard 0 to the keyboard stand with four screws. [NOTE] At this time, the shorter grounding wire should be attached with one of the four screws. 3) Plug the keyboard cable ® to the keyboard 0 and secure with screw 0. [NOTE] At this time, the longer grounding wire should be attached with the screw. grounging wire (long) grounging wire (short) -3-