Brother International BAS-411 Instruction Manual - English - Page 162
Other
View all Brother International BAS-411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
VI OTHER The following will occur when enlarging characters and patterns on the BAS-411. Example: If the letter "0" is enlarged 9.99 times in font No. 1, under picking will continue from the first stitch (stitch length approx. 18 mm), but because the stitch length is too long, stitches will not be properly formed and thread cast-offs may occur. If this happens, sew with the following procedure. 1. "Thread breakage", "Press END-key" will be displayed alternately. 2. Press the key. E N D EMERGENCY 3. Return to the stitch before the position at which the thread cast-off occurred with the step-back key, and then press the key and stop the step back operation. 4. Hold the needle thread by hand and press the key. ONE STITCH ONE STITCH START 5. Pull the needle thread out and bring the bobbin thread to the top of the material. 6. Hold the needle and bobbin threads, and then press the key 5-6 times. Cut the needle and bobbin threads held in hand with scissors. 7. Press the key. Continue sewing. -158-