Dell Precision T7400 User's Guide - Page 183
CAUTION, NOTICE, connectors on the system board.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
1 2 1 memory riser cards 1 and 2 2 memory riser cards 3 and 4 6 Disconnect the power cables from memory riser cards 3 and 4. 7 Grasp the memory riser card 3 at each corner and lift memory riser cards 3 and attached card 4 from the DIMM_3 and DIMM_4 memory module connectors on the system board. If a card is difficult to remove, gently ease it back and forth to remove it from the connector. CAUTION: Fully-buffered memory modules may become very hot during normal operation. Ensure that memory modules have had sufficient time to cool before you touch them. 8 Press out the securing clip at each end of the module connector on the memory riser card into which you are installing memory. NOTICE: Full-length heat spreaders (FLHS) are required for any memory in a memory riser and for 667 MHz DIMMs. Adding and Replacing Parts 183