Dell Precision T7400 User's Guide - Page 197
If you are installing a new card, remove the filler bracket to create a card
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
1 2 1 release tab 2 card retainer 5 If you are installing a new card, remove the filler bracket to create a cardslot opening. Then continue with step 7. NOTICE: Ensure that you release the securing tab to unseat the card. If the card is not removed correctly, the system board may be damaged. 6 If you are replacing a card that is already installed in the computer, remove the card: a If necessary, disconnect any cables connected to the card. b If the card is full-length, press the release tab on the end of the alignment guides on the fan bracket. c If the connector has a release tab, press the release tab as you grasp the card by its top corners, and ease it out of its connector. 7 Prepare the card for installation. Adding and Replacing Parts 197