Dell Precision T7400 User's Guide - Page 191
memory riser card from which you are removing memory.
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
1 2 3 1 power connectors (4) 3 securing clips (2) 2 memory module connectors (4) 7 Grasp the memory riser card 3 at each corner and lift memory riser card 3 and attached card 4 from the DIMM_3 and DIMM_4 memory module connectors on the system board. If a card is difficult to remove, gently ease it back and forth to remove it from the connector. CAUTION: Fully-buffered memory modules may become very hot during normal operation. Ensure that memory modules have had sufficient time to cool before you touch them. 8 Press out the securing clip at each end of the module connector on the memory riser card from which you are removing memory. 9 Grasp the module and pull up to lift the memory module from the memory riser card. If a module is difficult to remove, gently ease it back and forth to remove it from the connector. Adding and Replacing Parts 191