Epson LQ-1000 User Manual - Page 120
copper-colored ribbon cables by gently pulling them out of the black
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Next, remove the dust cover and ribbon cartridge (see Chapter 1 for more information), and slide the print head to the middle of the printer. Unlock the print head by moving the two locking levers to the left and right, as indicated by the arrows in Figure D-1. Figure D-1. Print head replacement Slide the print head over to the left side of the printer, and lift the print head off the carriage as shown in Figure D-2. Disconnect the two copper-colored ribbon cables by gently pulling them out of the black connector blocks on the floor of the printer. Now lift the print head assembly out of the printer. (The connector blocks stay attached to the printer.) D-9
Next, remove the dust cover and ribbon cartridge (see Chapter 1 for
more information), and slide the print head to the middle of the
printer. Unlock the print head by moving the two locking levers to the
left and right, as indicated by the arrows in Figure D-1.
Figure D-1. Print head replacement
Slide the print head over to the left side of the printer, and lift the
print head off the carriage as shown in Figure D-2. Disconnect the two
copper-colored ribbon cables by gently pulling them out of the black
connector blocks on the floor of the printer. Now lift the print head
assembly out of the printer. (The connector blocks stay attached to the
printer.)
D-9