Epson LQ-1000 User Manual - Page 159
ESC D, Format, Set Horizontal Tabs, Comments, Set Relative Tabs, Tab Vertically
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
ESC D Set Horizontal Tabs Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1B D (n1) (n2) 68 (n1) (n2) 44 (n1) (n2) ... 0 ... 0 ... 00 Comments: This command allows setting of up to 32 horizontal tabs. These are entered as n1, n2, n3 etc. (in the range 1 to 255) with ASCII 0 as the terminator. The tab settings n1, n2, n3 etc. must be entered in ascending order. If nl = 0, all tabs are cleared. Tab settings are not affected by character width. With proportional printing, tab settings are based on the character width of pica print. ESC e Set Relative Tabs Format: ASCII code: ESC Decimal: 27 Hexadecimal: 1B e (n) (m) 101 (n) (m) 65 (n) (m) Comments: The value of m is 0 to 127. If the variable n equals 0, the format is horizontal. If the variable n equals 1, the format is vertical. VT Tab Vertically Format: ASCII code: VT Decimal : 11 Hexadecimal: 0B Control: CTRL K Comments: Advances the paper to the next tab setting in the channel selected by ESC /. If no channel has been selected, channel 0 is used. If no vertical tabs have been selected, the paper advances one line. I-17