Epson LQ-1000 User Manual - Page 36
Preparing the Paper for Loading, lb. paper. If you use a lighter or heavier weight
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Figure 2-5. The LQ-1000 model Preparing the Paper for Loading 1. The paper must be straight and clean. If the paper is slightly bent, curled or uneven, it will not feed correctly. 2. The cut sheet feeder holds a maximum of 60 sheets of standard weight (20 lb.) paper. If you use a lighter or heavier weight of paper, compensate accordingly. (If more than one sheet of paper is being loaded at a time, remove some of the paper from the paper bin.) 3. Loosen the paper stack by rifling through it a couple of times, then tap it on a flat surface to make it even. 2-5
Figure
2-5.
The LQ-1000 model
Preparing the Paper for Loading
1.
The paper
must
be straight and clean. If the paper is slightly bent,
curled or uneven, it will not feed correctly.
2.
The cut sheet feeder holds a maximum of
60
sheets of standard
weight
(20
lb.) paper. If you use a lighter or heavier weight of
paper, compensate accordingly. (If more than one sheet of paper is
being loaded at a time, remove some of the paper from the paper
bin.)
3.
Loosen the paper stack by rifling through it a couple of times, then
tap it on a flat surface to make it even.
2-5