Epson LQ-1000 User Manual - Page 42
to compensate for the cut sheet feeder.
View all Epson LQ-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4. Hold the cut sheet feeder on each side, press the release levers as shown in Figure 2-9, and lift the unit off the printer. Figure 2-9. Removing the cut sheet feeder Remember, if you decide to print with another type of paper feed system, such as the optional tractor feed, you'll have to: l Reset DIP switch 1-8 from ON back to OFF. (Don't forget to turn the power OFF then ON again so the printer will record the new setting.) Reset DIP switch 1-7 (skip-over perforation) if you're using continuous-feed paper. l Check any settings you might have changed in your word processor to compensate for the cut sheet feeder. l Replace the original front cover if you're loading individual sheets of paper (you can leave the narrow front cover on if you're using the optional tractor feed unit). 2-11