HP 2200 HP LaserJet 2200 Series - User Guide - Page 115
Printing Errors, Macintosh Problems continued, Symptom, Possible Cause, Solution
View all HP 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Macintosh Problems (continued) Symptom Possible Cause Solution Make sure the printer has been chosen in the Chooser by printing a self-test. (Simultaneously press GO and JOB CANCEL.) Check the AppleTalk name of the printer displayed on the self-test page. Make sure AppleTalk is on. (The button next to Active is selected in the Chooser.) You may need to restart the computer to activate the change. The printer driver does not automatically set up your selected printer even though you clicked Auto Setup in the Chooser. Reinstall the printer software. See Macintosh Installation. Select an alternate PPD. Printing Errors A print job was not sent to your desired printer. Another printer with the same or similar name may have received your print job. Check the AppleTalk name of the printer displayed on the self-test page. Make sure the cables are connected correctly, the printer is on, and the Ready light is on. You cannot use the Background Printing has computer while the printer not been selected. is printing. LaserWriter 8.3 Turn Background Printing on in the Chooser. Status messages will now be redirected to the Print Monitor allowing you to continue working while the computer is processing data to be sent to the printer. LaserWriter 8.4 and higher Turn Background Printing on by selecting File, Print Desktop, and Background Printing. ENWW Chapter 4 Problem Solving 105