HP 2200 HP LaserJet 2200 Series - User Guide - Page 144
Paper Specifications, Category - ink
View all HP 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Note Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography. Do not use raised or embossed letterhead. The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200° C or 392° F for 0.1 second). Paper Specifications Category Acid Content Caliper Curl in Ream Cut Edge Conditions Fusing Compatibility Grain Moisture Content Smoothness Specifications 5.5 pH to 8.0 pH .094-.18 mm (3.0-7.0 mils) Flat within 5 mm (.02 in.) Cut with sharp blades with no visible fray. Must not scorch, melt, offset, or release hazardous emissions when heated to 200° C (392° F) for .1 second. Long Grain 4% to 6% by weight 100-250 Sheffield For complete paper specifications for all HP LaserJet printers, see the HP LaserJet Printer Family Print Media Guide. For ordering information, see Supplementary Documentation. 134 Appendix B Media Specifications ENWW