HP 2200 HP LaserJet 2200 Series - User Guide - Page 156
Installing an HPJetDirect EIO Card, Test/Configuration If
View all HP 2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Installing an HP JetDirect EIO Card 1 1 Turn the printer off, and disconnect the power cord. 2 Open the interface cable door by pressing on the release tabs and swinging the door outward. Disconnect all interface cables. 3 Locate the EIO slot. Firmly insert the HP JetDirect EIO card into the 2 EIO slot. Twist in the retaining screws. 4 Attach the appropriate network cable to the EIO card. 5 Reinstall the interface cable(s) and the power cord. Reinstall the interface cable door. Turn the printer on. 3 Note Print a self test/configuration page to check that the HP JetDirect EIO card appears as an installed option. See Self Test/Configuration Page. If this page does not print in your language, see Printing Special Pages. 4 When you print a self test/configuration page, an HP JetDirect Configuration page that contains network configuration 4 and status information will also print. 5 146 Appendix C Printer Memory and Expansion ENWW