HP GbE2c HP GbE2c Ethernet Blade Switch for c-Class BladeSystem Application Gu - Page 59
Configuring Switch 1 (CLI example), Add VLAN 2 to Spanning Tree Group 2.
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Configuring Switch 1 (CLI example) 1. Configure port and VLAN membership on Switch 1 as described in the "Configuring ports and VLANs on Switch 1 (CLI example)" section, in the "VLANs" chapter of this guide. 2. Add VLAN 2 to Spanning Tree Group 2. >> /cfg/l2/stp 2 >> Spanning Tree Group 2# add 2 (Select Spanning Tree Group 2) (Add VLAN 2) VLAN 2 is automatically removed from spanning tree group 1. 3. Apply and save. >> apply >> save (Apply the port configurations) (Save the port configurations) Configuring Switch 2 (CLI example) 1. Configure port and VLAN membership as described in the "Configuring ports and VLANs on Switch 2 (CLI example)" section in the "VLANs" chapter of this guide. 2. Add VLAN 2 to Spanning Tree Group 2. >> /cfg/l2/stp 2 >> Spanning Tree Group 2# add 2 (Select Spanning Tree Group 2) (Add VLAN 2) 3. VLAN 2 is automatically removed from Spanning Tree Group 1. 4. Apply and save. >> apply >> save (Apply the port configurations) (Save the port configurations) Configuring Switch 1 (BBI example) 1. Configure port and VLAN membership on Switch 1 as described in the "Configuring ports and VLANs on Switch 1 (BBI example)" section, in the "VLANs" chapter of this guide. 2. Add VLAN 2 to Spanning Tree Group 2. a. Click the Configure context button on the Toolbar. b. Open the Spanning Tree Groups folder, and select Add Spanning Tree Group. Spanning Tree Protocol 59