HP P2055d HP LaserJet P2050 Series - Software Technical Reference - Page 66

SNMP Use the SNMP screen to set SNMP networking features for the product. Figure 2-29 SNMP screen The following options are available on the SNMP screen: ● Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the product. Custom community names can be configured to control management access to the product. ◦ Set Community name: Type the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the product. ◦ Confirm Set Community name: Retype the SNMP Set Community Name (password) to allow SNMP information to be configured (or written) on the product. ◦ Get Community name: Type the SNMP Get Community Name (password) to allow SNMP information to be read from the product. ◦ Confirm Get Community name: Retype the SNMP Get Community Name (password) to allow SNMP information to be read from the product. ◦ Disable SNMP v1 default Get Community name of "public". Select this option to disable the default Get community name "public". If you select this option, type the appropriate values into the Get Community name and Confirm Get Community name fields. ● Enable SNMP v1 read-only access. Select this option to enable the SNMP V1 agents on the product, but limit access to read-only. Write-access is disabled. The default Get Community name "public" is automatically enabled. ● Disable SNMP v1. Select this option to disable the SNMP V1 agents on the product, which is recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery utilities might not operate properly. 48 Chapter 2 Windows software description ENWW