HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 102
Write Cache is, WARNING - Drive
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
3-45 DAAD Diagnostic Messages Continued Message Description Threshold violations for drive (bay) X This is a list of the individual thresholds that have been violated for this drive. Recommended Action The drive may need to be replaced. Run the Compaq Diagnostics Utility to determine if the drive has been initialized and the threshold violation warrants drive replacement. Unknown disable code A code was returned from the array accelerator board that DAAD does not recognize. Obtain the latest version of DAAD. Warning bit detected A monitor and performance threshold violation may have occurred. The status of a logical drive may not be OK. Check the other error messages for an indication of the problem. WARNING - Drive Write Cache is enabled on X Drive has its internal write cache enabled. The drive may be a third-party drive or the drive's operating parameters may have been altered. Condition may cause data corruption if power to the drive is interrupted. Replace the drive with a Compaq supplied drive, or restore the drive's operating parameters. Wrong Accelerator This could mean that either the board was replaced in the wrong slot or placed in a system that was previously configured with another board type. Included with this message is a message indicating the type of adapter sensed by DAAD and a message indicating the type of adapter last configured in EISA nonvolatile RAM. Check the diagnosis screen for other error messages. Run the System Configuration Utility to update the system configuration. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide