HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 20
Front Bezel Door, Reverse steps 1 and 2 to replace the front bezel door.
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2-7 Front Bezel Door To remove the front bezel door (tower model only): 1. Swing the front bezel door open approximately 45 degrees. 2. Lift the front bezel door up, then pull it away from the chassis. COMPACT Figure 2-3. Removing the front bezel door NOTE: Drive cage may not be as illustrated. Reverse steps 1 and 2 to replace the front bezel door. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
2-7
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
Front Bezel Door
To remove the front bezel door (tower model only):
1.
Swing the front bezel door open approximately 45 degrees.
2.
Lift the front bezel door up, then pull it away from the chassis.
Figure 2-3. Removing the front bezel door
NOTE
:
Drive cage may not be as illustrated.
Reverse steps 1 and 2 to replace the front bezel door.