HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 141
IDE CD-ROM Drive Specifications, Digital Audio Out Connector - specs
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
5-7 IDE CD-ROM Drive Specifications Continued U.S. Laser Parameters Metric Type Semiconductor laser GaAlAs Wave Length 780 +/- 25 nm Divergence Angle 53.5 +/- 1.5 degrees Output Power 0.14 mW Audio Interface Line Out Connector RMS Output Voltage .07 VRMs S/N Ratio 80 dB Channel Separation 65 dB THD and Noise .01% @ 1kHz Frequency Response 20 to 20 kHz, (+1/-3 dB) Digital Audio Out Connector 2 pin digital audio out connector described in the ARAPI Spec., 2.6, Section 11.1 included. This serial digital audio out conforms to the IEC-958 EIAJ CP-1201 format. Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
5-7
Compaq ProLiant 3000 Servers, for use with Intel 350 MHz or greater processor-based servers only, Maintenance and Service Guide
IDE CD-ROM Drive Specifications
Continued
U.S.
Metric
Laser Parameters
Type
Semiconductor laser GaAlAs
Wave Length
780 +/- 25 nm
Divergence Angle
53.5 +/- 1.5 degrees
Output Power
0.14 mW
Audio Interface
Line Out Connector
RMS Output Voltage
.07 VRMs
S/N Ratio
80 dB
Channel Separation
65 dB
THD and Noise
.01% @ 1kHz
Frequency Response
20 to 20 kHz, (+1/-3 dB)
Digital Audio Out Connector
2 pin digital audio out connector described in the ARAPI Spec., 2.6, Section 11.1 included. This serial digital audio out
conforms to the IEC-958 EIAJ CP-1201 format.