HP ProLiant 3000 ProLiant 3000 Servers Maintenance and Service Guide - Page 25
Side Access Panel
View all HP ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2-12 Removal and Replacement Procedures Side Access Panel WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching them. To remove the side access panel: 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Loosen the two screws at the front on the chassis with either a T-15 or Phillips screwdriver. 3. Slide the side access panel backward, then pull it away from the chassis. COMPACT Figure 2-8. Removing the side access panel NOTE: Drive cage may not be as illustrated. Reverse steps 1 through 3 to replace the side access panel.
2-12
Removal and Replacement Procedures
Side Access Panel
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
To remove the side access panel:
1.
Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2.
Loosen the two screws at the front on the chassis with either a T-15 or
Phillips screwdriver.
3.
Slide the side access panel backward, then pull it away from the chassis.
Figure 2-8. Removing the side access panel
NOTE
:
Drive cage may not be as illustrated.
Reverse steps 1 through 3 to replace the side access panel.